Description
- NOTE - The operating voltage of the product is 220V( 110V-120V voltage, we will be equipped with a voltage converter), S;For Flue Diameter 13.5-18cm.L;For Flue Diameter 18-22cmand the chimney induced draft fan is used by leaving two ends of the wire for connection to the power source.
- NOTE - The household fireplace uses an induced draft fan and the outlet temperature should not exceed 60 degrees. Otherwise the induced draft fan will be damaged. Install the power cord with at least 0.5 square copper wire.
- NO NOISE - One of the most common complaints when it comes to powerful cooling fans is that they make a lot of noise. Luckily, our oscillating fan ensures a quiet operation so you don't have to compromise when it comes to the comfort of your home.
- EASY TO INSTALL - Very quiet, suitable for most types of fireplaces and does not require professional technicians to install.
- APPLY TO - It is very suitable for fireplace accessories/Pizza Ovens/ Wood Stoves. The chimney induced draft fan creates an exhaust and induces the rapid release of smoke to prevent the smoke from escaping smoothly from the chimney due to the poor chimney. Not only does the smoke drain quickly, but it also has excellent performance.
Product description :Solve Smoke ProblemsHelp Exhaust Fireplaces, Pizza Ovens, Wood StovesThe most widely used and recognized smoke evacuator in smoke extraction systems. This model is anti-freeze, anti-frost, anti-high temperature, anti-corrosion, anti-rust, and durable.These fans are designed specifically for applications where efficient operation,low energy consumption, variable speed and compact design are of utmost importance. These fans should be installed at the termination point of a solid fuel chimney or stack system and can be mounted on masonry or metal chimneys. Chimney Fan is for use where flue gas temperatures do not exceed 575 F for intermittent operation, and 482 F for continuous operation.Specification:Product name: Electric Draft Inducing FanVoltage: 190-240VScope of delivery: 1 * induced draft fanInstallation method: Very simple: install the induced draft fan on the chimney exit, run a cable in a suitable place in the room and connect it to a single 220V power supply. (Please turn off the device when installing or removing to avoid electric shock.)Note:1. Turn off the power switch when installing or removing to avoid electric shock.2. The interface to the smoke outlet must be fastened with waterproof insulating tape.3. The installation at the interface with the chimney must be firm and the interface must be tightly integrated into the chimney for the best effect.