Appliances

Appliances

Cookware

Cookware

Bed & Bath

Bed & Bath

Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
  • Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
  • Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
  • Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
  • Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
  • Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
  • Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
  • Load image into Gallery viewer, Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.
Vendor
Neewer

Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.

4.1
Regular price
€51,00
Sale price
€51,00
Regular price
€84,00
Sold out
Unit price
per 
Save 39% (€33,00)
Error You can't add more than 500 quantity.

  • Tracked Shipping on All Orders
  • 14 Days Returns

Description

  • Each key has a red alloy handle.
  • Set includes:1.5 x 1.2mm x 1, 2.5 x 1.3mm.
  • The handles have a Titanium nitride coating for increased durability

Shipping and Returns

  • We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
  • Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
  • Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
  • All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
  • Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
  • In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

Customer Reviews

My new allens! They work perfect. Used them many times already. I usually use my Harbor Freight allens, since my Craftsman (Crapsman) have rounded. But since getting these, they're all I use.Others have mentioned spinning. YES they have set screws. JUST TIGHTEN THE SET SCREW, and they should last a very long time. 5Tried out their studio flash kit - loved it. Now I'm using these tools for my ... I was wary of the Neewer name, in the beginning. Tried out their studio flash kit - loved it. Now I'm using these tools for my racing drones, and they are awesome! The little plastic cap at the back fell out of one, but it snapped back in and works like new. The tips are really strong and true titanium.Must have if you need a hex kit for racing drones but don't want to shell out the big bucks. 5they feel good and are extremely snug / sharp fit lost 1 star because, the color is not as defined as pictured. the blue one is blue the other 3 are Almost the same color goldish with a slight shade variation. does not affect performance but does make for grabbing the right size on the fly a bit frustrating. i corrected this with a couple cans of spray paint. they feel good and are extremely snug / sharp fit. I like that. don't think i will be stripping these or anymore screws off for a while. well worth the money side note, the handles have end caps and make for storing extra screws /nuts / and small drill bits. perfect. 4Great screwdrivers This set is great! high precision and high quality, very well made, for the price can't beat them. For people complaining about the grub screws getting loose, come on! nothing that a little drop of blue thread locker can't fix, about the top cap falling off, nothing that a little drop of superglue can't fix, now if these would bother you, then buy a $35 set lol.... 5DONT SKIMP ON TOOLS!!!!! Lets face it, you spent $300+ on an RC. No matter if its a truck, car, quad, plane, or boat, you either going to do basic maintenance or upgrades. When you start loving that hobby, the last thing you want is to pull something and the screwdriver breaks, and you stuck not being able to put it back together and go and play...... I have invested a lot into my first piece, and I learned my lesson real fast.... DONT SKIMP ON TOOLS. After finding out that a local hobby shop did a poor job on a big bore shock install for me, I decided that if Im gunna drive this beast and break something, I better put 100% hobby effort into leaning everything about repair, maintenance, etc. After my re-education in "If you want something done right, do it yourself" occurred, I ordered these tools to begin my apprenticeship. I should have followed my instinct and order the good stuff, but nooooooooo, I had to save a few bucks and order these. Just don't do it, its not worth the headaches.First they don't have a flat spot on the shaft to tighten them down enough so they don't spin in the handle. Titanium Nitride? Sure they are after I tightened a small metric bolt on a CVD, the 1.5mm tip broke off....... IN THE HEAD OF THE BUTTON SOCKET! Thankfully I could pull it out....Of course Amazon was quick to get me a set of these the next day, but why have to go through the hassle? I returned my set to amazon, accepted the replacement. But in the mean time, I researched and found that the MIP tools were the best bet. Sure they are expensive, but so is this hobby. You think you weren't gunna break something? You think the shine pretty aluminum stuff wasn't gunna make it on your hobby vehicle? You think routine maintenance was gunna happen? Your wrong if you thought that. Get the tools that will keep you from getting frustrated, and leave the junk stuff alone.Oh, and if you think that replacing everything on your RC vehicle with shine pretty aluminum is the way to go, then you need to read and research. Something yes, somethings NOOOOOOO. 1Well made, quality tool I am using these for building hobby drones and I really like them so far.The are light and the look and feel like they are relatively high quality. I can tell that the titanium alloy used in the bit is harder than most Allen key sets are because these tools have very defined edges on the hex tip and they aren t rounding off or slipping with use. They fit into hex sockets pretty tightly so they feel precision machined to the correct size.They have a good reach so they can get into tight areas and the fact that they are semetrical like a screwdriver means I you don t have to keep removing the tool and reinserting it to turn it a full 360 degrees if something is in the way. That s a problem that s been driving me crazy with regular L shaped Allen keys and also with the pocket-knife, foldable style Allen keys.These are really making life easier. 5Don't waste your money on a larger set for the same price These are great. Immediately used them to remove a stripped screw from one of my quads with no issue at all. The titanium nitride feels sharp and precise. Haven't put more than a few weeks work on them but they still look brand new. I was initially concerned the TiNi would wear quickly but that hasn't been the case so far. 5Great if new to RC hobby or for keeping in a rc "go bag" but not bad for the $ These tools are great during first use or limited overall use but the time/downtime,patience and hardware that need to be removed(aggravating/time consuming) if or more so once the tips of the drivers get a little bit of use becoming rounded in turn leaving a headache of stripped hardware as well as the tools themselves are enough for me to either need to replace the 1.5 2 2.5 mm with a quality made/very reliable make of hex drivers. I will say that for my rc "go bagc that I grab when in a mad dash to get out for a bash before the wife arrives home finding myself with a much more frustrating list of tasks to accomplish... I have had several sets so to be able to have a fresh set in different locations and as long as I've found time to put some threadlock on the grub screws that keep the shaft from spinning than you really cant beat them at that price point especially if you find your tools seem to up n walk away on you often as I do or you simply cant afford the better higher end tools. Certainly didnt expect much and I will infact be buying another set or similiar set to keep on hand but if your new to hobby rc vehicles or cant afford to buy the higher end tools than may just think about buying a second set, same diameter shafts of a higher quality or just buy the MIP single drivers that you find yourself using the most as I've rarely used the 3.0mm or the smallest included 1.0 mm. 4Excellent set of hex keys These have worked out very well for my hobby grade RC's. I had issues with 2 other sets of hex keys stripping. To the point that I started replacing my hex screws with Phillips.I got this set on one of the lightning deals. I'm so glad I gave these a shot. I have had no issues with stripped hexes since. The color code definitely helps when digging through the tool box.I would definitely recommend these and I would buy them again. 5The quality is good enough to get the job done without stripping hardware Been wrenching with these drivers for over a month now, assembled two heli kits with them. The quality is good enough to get the job done without stripping hardware. These are no frills, but are quality tipped hex drivers. The tips are precision and can hold most of the screws in inverted vertical orientation without dropping, which makes working with small screws easy. The shafts can slip inside the handle, which I fix with a little thread locker on the shaft and the locking screw, haven't had a problem with these drivers at all. I hope this helps your decision whether to purchase or not, if it did, please vote. Thank you! 5
Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.

Neewer - Set of 4 Hexagonal Screwdrivers Made of Titanium Nitride with Coloured Handles.Compatible with 1.5, 2, 2.5 and 3mm Screws.

4.1
Error You can't add more than 500 quantity.
Regular price
€51,00
Sale price
€51,00
Regular price
€84,00
Sold out
Unit price
per 
Save 39% (€33,00)